|
 |
Vs-600HP-2 |
 Always wear safety goggles to protect your eyes, and wear other appropriate safety items for protection. |
||
Product Description |
||
| (TR600HP) 1 1/4" High Pressure Valve Stem is Rated to 80 psi max cold pressure inflation and rim thickness of .030". .453 rim hole. | ||
Usage Instructions |
||
| 1. Before installing the valve stem, inspect the hole in the rim for nicks, burrs, corrosion or other roughness that could damage the new valve or prevent a leak-free seal. 2. Carefully pull the valve stem into the hole with the Vt-115 or Vt-116 and make sure it is properly sealed. 3. Make sure the valve grommet is the correct size for the hole in the wheel, and that the valve stem is properly positioned for balance and to allow easy air pressure checks. 4. Also Make sure the valve core is fully seated and does not leak air once the tire has been mounted and inflated. 5. Always install the cap to keep out dirt and moisture. Specifications: Maximum pressure of 65 psi (4.5 bars) Maximum rim thickness of .156" Maximum speed of 130 MPH (209 KPH) |
||